PowerLogger 10 M229J – Dranetz BMI Digital Multimeters
600.0V (Vdc High Range)
The PowerLogger 10 multimeter is a power quality troubleshooting tool, as well as a high performance precision instrument for laboratory use, service and training. With a display range of 300,000 counts, as well as outstanding accuracy and long-term stability, it fulfills all requirements for use in calibration and R&D laboratories. The instrument can be utilized on-site for precision maintenance and calibration tasks thanks to battery operation.
Voltage 600 V and current 10 A (Rms or DC)† max measurements
Frequency, RMS value of AC measuring voltage
DC measurement precision, 5æ places ( 309,999 counts)
AC measurement precision, 4æ places ( 30,999 counts)
Power and Energy measurements (W, VAr, VA, Wh, VArh, PF)
Maximum value for periodic power with date and time
RMS Waveshape, allows for waveshape independent measurement (TRMS AC and AC+DC) up to 100 kHz, and up to a crest factor of 5
Power disturbance recording
Data memory capable of storing 60,000 mesaured values
Triple display allows momentary measured value and up to two additional values are displayed simultaneously
Momentary, minimum and maximum measured values
Continuity testing with audible signal to indicate connectivity
Event counting (number and duration), zero-crossings, stopwatch, and data-compare
Capacitance measurement to 300 uF
Resistance measurement† to 15 meg ohms†
Temperature measurement in degrees Fahrenheit or Celsuis
Thermocouple measurement capabilibities of Type J and K thermocouples
Battery run time, approximately 100 hrs on 2 AA alkalines
Low battery indicator automatically displayed if battery voltage drops below 2.3 V
Overload Protection, audible sound is employed if upper voltage or current range is exceeded
Fuse indicator displays message that the fuse for current measurements needs to be replaced
Specifications
Vdc High Range
600.0V
Digits
5.75
Measurements
DCV, ACV, Resistance, Continuity, Diode, DCA, ACA, Frequency, Capacitance, TRMS, Temperature, dBm