XPH Series – 175 to 420W – Sorensen Power Supplies
75.0V (Max. Voltage)

The economical XPH features mixed-mode regulation and single, dual, and triple isolated outputs in power levels up to 420 watts. The XPH Series includes the following models:

XPH 35-5
XPH 18-10
XPH 35-4D
XPH 35-4T
XPH 42-10
XPH 75-2D

The Sorensen XPH Series provides 175 to 420 watts of DC power. The XPH is a compact, high performance low cost power supply suited for benchtop applications.

The XPH Series uses combined switch-mode pre-regulation with linear post-regulation to provide performance comparable with an all linear design. The XPH features excellent line and load regulation with low noise and good transient response. The XPH Series is available in a single, dual and triple output for benchtop use.

The XPH dual output models have two independent and isolated outputs with its own on-off switch. The outputs can be wired in either series or parallel to provide higher voltage and higher current output. All outputs are instrinsically short circuit proof, and are protected against external voltages and reverse currents. The XPH triple output model has the same features as the dual output model with an additional switchable fixed output of 3.3V and 5V.

Low noise
Excellent line/load regulation
Coarse and fine voltage controls
Constant voltage or constant current operation with automatic crossover and mode indication
Individual ON/Off switch per output (not including fixed output)
Switchable 3.3V/5V output on triple output model
Switchable remote sense (XPH 18-10 amd XPH 42-10 models)

Specifications
Max. Voltage
75.0V

Number of Outputs
Triple

Max. Current
10.00A

More Details
Compact high power bench DC power supplies