PS325 – Stanford Research Systems Power Supplies
2.5kV (Max. Voltage)

The PS300 High Voltage Power Supply series consists of three efficient, microprocessor-controlled, switching DC power supplies capable of delivering 25 W of output power at voltages up to 5 kV. All models have 0.001 % regulation and 0.05 % accuracy, and the output voltage can be adjusted with 1 V resolution over the entire operating range.

All PS300 series supplies have rear-panel SHV connectors. Optional cables allow connection with standard high-voltage connectors (SHV or MHV). A three-position, high-voltage enable switch on the front panel prevents the high voltage from being turned on under computer control unless the switch has been manually armed. A highly visible red LED always indicates when the high voltage is on. Convenient front-panel LED displays indicate both the voltage and current delivered to the load at all times.

5 kV, 2.5 kV, 1.25 kV supplies
25 W output power
1 volt resolution
0.001 % regulation, 0.05 % accuracy
Dual polarity
Programmable limits and trips
0.0015 % ripple
Voltage and current monitors
Stored settings
GPIB interface (opt.)

Specifications
Max. Voltage
2.5kV

Number of Outputs
Single

Max. Current
10.00mA

More Details
High Voltage Power Supply 25 VDC to 2.5 kV