N2818A Agilent 200 MHz 10:1 Differential Probe with AutoProbe

N2818A Agilent 200 MHz 10:1 Differential Probe with AutoProbe
200 MHz

Key Features & Specifications

•Wide dynamic range for various applications: ±20V differential, ±60V common mode
•High input resistance and low input capacitance for low probe loading: 1 MΩ//3.5 pF between inputs
•Direct connection to AutoProbe interface (no power supply required)
•Ideal for high-speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, FlexRay)

Description
The N2818A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs. The N2818A differential probe offers 10:1 attenuation setting, allowing it to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probe has an input resistance of 1 MΩ and low input capacitance of 3.5 pF to minimize circuit loading. The N2818A probe is compatible with select InfiniiVision and Infiniium oscilloscopes with 50 Ω AutoProbe interface input. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface. For use with non-AutoProbe input oscilloscope, use the N2792A.