E5339A Agilent Mictor Probe-Low Voltage, with 40-pin Cable Connectors

E5339A Agilent Mictor Probe-Low Voltage, with 40-pin Cable Connectors
34-Channel

Key Features & Specifications

Signal Access
•34 channels: 32 single-ended data, 2 single-ended clock
Probe Performance
•3.0 pF equivalent load capacitance
•Equivalent to the logic analyzer data rate the probe is attached to
•Measure signals with as little as 250 mV p-p signal amplitude
Connectivity
•Provides convenient, reliable connection to target through Mictor connector
•Mictor connector is easy to incorporate into your design, Agilent number 1252-7431 or AMP number 2-767004-2
•Can be used with support shroud
Compatible With:
•Logic analyzers with 40-pin cable connectors Logic Analyzer Cable Connectors
•Support shrouds available for board thickness to 0.12 inches
•38-pin Mictor footprint
Description
The Agilent E5339A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any Agilent logic analyzer with a 40-pin cable connector.

•Minimum signal amplitude as small as 250mV p-p
•34 channels, single-ended clock and data
•Small, 3.0pf, equivalent load capacitance
•Capable of data rates up to 600Mb/s (maximum rate dependent on analyzer used)
•Small connector is easy to incorporate into your design
•Agilent number 1252-7431 or AMP number 2-767004-2
•Support shrouds available for board thickness to 0.120 inches