6203-60 – Chroma Power Supplies

6203-60 – Chroma Power Supplies
60.0V (Max. Voltage)

Low Cost programmable DC Power supplies from 60W to 12KW. Many models to choose from with optional GPIB and RS232 interface. Ideal for benchtop or ATE applications.

The Chroma 6203 series programmable DC power source offers maximum rated DC power for output Voltage (15V/30V/60V), output current (5A/10A/20A), output power (300W), is an exceptional product providing the highest power density in its class to any bench or system application.

The higher precision requirement, 6203 series can be easily combined with 6200 series in dual, triple and quad configurations. Multiple units can be combined in auto parallel, auto series and auto tracing configurations to obtain more Voltage/Current output. For enhanced control, you can upgrade the 6203 series from front panel control to remote analog signal to computer programming.

Excellent regulation and transient, the voltage mode transient response time less than 500μs recovery to 50mV band for 50% load change in the range of 25% to 100% of the rated load, and the front panel control 10- turn voltage and 1-turn current potentiometers, allow accurate adjustment of voltage and current output settings, the constantvoltage, constant current output allows operation as either
a voltage source or current source.

The 6203 series is very easy to operate from the front panel keypad, or from the remote controller via IEEE 488, RS-232 or APG (Analog Programming nterface). The APG includes over voltage protection (OVP), remote ON/OFF, master slave tracking, output voltage and current can be controlled with external 0-10 voltage analog signals.

Excellent regulation and transient response
Single,dual, triple,and quad outputs
Analog, GPIB, or RS-232 programming
Overvoltage protection (Option)

Specifications
Max. Voltage
60.0V

Number of Outputs
Single

Max. Current
5.00A

More Details
Programmable DC Power Supplyrcuits prevent output voltage overshoot when supply is turned on and off. It can be
used for R&D design characterization, production testing, and QA verification of commercial, industrial, and aerospace electronic products.

Built-in power factor correction circuit provides input power factor of over 0.98 minimum for full load
Thermal shutdown
Optional internal computer control (GPIB)
Standard overvoltage protection (OVP)

Specifications
Max. Voltage
60.0V

Number of Outputs
Single

Max. Current
18.00A

More Details
Programmable DC Power Supply