6100 Plus – QuadTech Hipots

6100 Plus – QuadTech Hipots
5.000kV (Max. Output AC Voltage)

The Guardian 6100 Plus Electrical Safety Analyzer performs AC and DC hipot (hypot), insulation resistance, ground bond and leakage current measurements for a complete electrical safety testing solution. The built-in leakage current scanner provides up to 20A input current capability for functional run testing, and, in addition, the connections for earth, enclosure, patient and line leakage current testing to meet IEC 60601-1 compliance requirements.

Perform functional and safety testing in a single unit
Simultaneous Hipot and Ground Bond Testing
Integration into an automated production environment
High voltage/high current scanner options for multi-point testing
Archive test setups, data and results with CaptivATE Automation Software
Programmable AC Hipot Voltage 50 to 5000VAC, Output Current to 40mA
Programmable DC Hipot Voltage 50 to 6000VDC, Output Current to 12mA
IR Measurements from 100kohm to 50Gohm, Test Voltage 50 to 1000VDC
Programmable Ground Bond Current from 1 to 40A*, R Measurement to 510mohms
Twin Port – Simultaneous Hipot and Ground Bond
Built-in 20A Hipot/Line Leakage Scanner
Functional Run Testing: Voltage (to 300V), Current (to 20A) or Power (to 4400VA)
Earth, Enclosure, Patient & Patient Auxiliary Leakage Current Measurements
Open/Short Circuit Detection to ensure DUT is connected
Pause Mode Allows the Operator to Change Device Connection and Continue
Programmable Hi/Lo Limits for Pass/Fail Testing
Programmable Ramp, Dwell and Test Times
Perform Multiple Tests in Sequence with Store/Recall of 100 Setups, 50 Steps Each
Front Panel Lockout Prevents Changes to the Test Setup
Automatic Offset to Zero Out Residual Current
Fast HV Cutoff and Quick Discharge of Device Under Test
RS-232 and I/O Interfaces Included Standard
IEEE-488 and Printer Interfaces Optional
Built-In Operator Prompted Software Calibration Routine
Front and Rear Panel Output Connections
40A Ground Bond Testing with Optional Transformer
CaptivATE Automation Software for G6100 Plus; Optional
CE, TUV & UL Marked
GB: Standard 30A output, Optional 40A output

Specifications
Max. Output AC Voltage
5.000kV

Max. Output DC Voltage
6.000kV

Output AC Current
40.0mA

Output DC Current
12.0mA

More Details
Guardian 6100 Plus [Medical] Electrical Safety Analyzer (CE Mark)