1157A Agilent Active Probe, 2.5 GHz

1157A Agilent Active Probe, 2.5 GHz
•2.5 GHz bandwidth

Key Features & Specifications

•2.5 GHz bandwidth
•Small size makes probing easier
•100 k-ohm, 0.8 pF, non-resonant input impedance
•+/- 15 V offset
•5 V peak-to-peak dynamic range; for waveforms with edges >3nsec, dynamic range is >12Vpp
•Accessories designed for minimal loading on your device and optimum response
•AutoProbe interface compatible
Description
The Agilent 1156A, 1157A, and 1158A family of active probes offers R & D engineers the performance they need to probe small geometries in hard-to-reach areas on the DUT. These probes were designed specifically for the Infiniium Series, and InfiniiVision 5000, 6000 and 7000 Series oscilloscopes (except for 6000 Series 100MHz models).

As the speeds in your design increase, you may notice more overshoot, ringing, and other anomalies when connecting an oscilloscope probe. Probes form a resonant circuit where they connect to the device. If this resonance is within the bandwidth of the oscilloscope probe you are using, it will be difficult to determine if the measurement anomalies are due to your circuit or the probe.

The Agilent 1156/7/8A probes optimize performance to make your job easier.

•2.5 GHz bandwidth
•Small size makes probing easier
•100 k-ohm, 0.8 pF, non-resonant input impedance
•+/- 15 V offset
•5 V peak-to-peak dynamic range
•Accessories designed for minimal loading on your device and optimum response
•AutoProbe interface compatible